Joint Tech stations support Offline charging through configuration of the firmware. This method will completely bypass software authorization, meaning no data or payment processing will occur for sessions using this method.
1. In your browser, enter 192.168.100.199 to log in to the Joint Tech station management interface.
Note: This guide assumes that the station has already been connected to the network. Please ensure that network configuration is completed before proceeding with the steps.
2. From the side menu, select Charger.
3. Click Recovery to restore to factory settings. This will enable offline plug-and-charge capability.
4. Select OK on the pop-up dialogue, and offline charging will be enabled after the station restarts.