Reference Documentation
Recommended Tools
- Torx T20 Screwdriver
- Laptop with ethernet capabilities, or with adapter for ethernet
- RJ45 Ethernet cable
- Firmware file (Provided by Noodoe tech support. File is a .tar.gz extension)
Logging into the charger
Follow the Web Portal connection steps for the AC7L listed in this article: LiteOn Web Portal Connection
Performing the Firmware Update
Once logged into the web portal for the AC19L Exceed, navigate through the following:
- Select Maintenance on the left
- Select Choose File under the firmware upgrade section, and select your firmware file - start a ticket to receive the most up to date firmware. Do not unzip the file, select it as is.
- Upload - If connected using the Wi-Fi method, it is recommend to stay near the station while uploading to avoid any data loss which might require you to re apply the upgrade.
- After the firmware upgrade is complete, the station will reboot & you will be prompted to log back in.
You can confirm the firmware upgrade was successful by navigating to Configuration on the left hand side, then Factory Settings. The Firmware Version listed under this section should match the file you uploaded earlier.